Steps: How to Remove Speed Limiter on Electric Scooter? (2023)

Well, an electric scooter speed limiter is very easy to remove, and that’s directly proportional to how to increase the speed of an electric scooter. Lots of people do this to double their driving fun.

Here, I am discussing different scenarios for your ease. Pick the solution from below list that you need.

Before starting the process, you should know that every scooter has its way of removing the speed limiter. In some electric scooters, you have to cut wires, while in some, you can do that using display and particular buttons.

Generally, when removing the speed limiter on the scooter, you will have to perform easy-to-do steps. By doing these, you will highly ensure the maximum speed of your vehicle.

7 Easy Steps to Make Electric Scooter Faster by Display:

1. Turn on the electric scooter display.
2. Press, and hold the electronic brake from the handle
3. During operation, keep the brake pressed.
4. Now, you have to press the power button, and it’ll show you P1 on display.
5. Move P1 to P3 by using a button here, called Light.
6. When you have done with this, press the “S” button to set your desired settings.
7. Congratulations, the speed limiter has been removed now. Turn on the scooter, get your hands off to the brake, and enjoy your ride.

7 Simple Steps to Manually Increase E-Scooter Speed by Removing Limiter:

Here, you need two essential tools for this operation. These include a pincer and a screwdriver. Now, follow the steps one by one for successful operation.

1. Start with the two crosshead screws at the bottom, front of the deck, and remove with a pincer.
2. Next are the two crosshead screws at the top; remove them with a pincer.
3. Now, slide the casing open towards the front wheel.
4. Here, you will have a look at a bunch of wires. Usually, there are four wires of one color. Let’s assume you have found the four white wires; what’s next!
5. Pull out, and cut them at the base using a screwdriver.
6. Tape the wires to keep them clean of dirt, and then close the casing by sliding it back.
7. Pull the four crosshead screws back, and you have done this!

So, that’s how to increase the speed of electric scooters by removing the limiter. But still, there are lots of other factors present that can make your electric scooter faster.

Making Electric Scooter faster is mainly demanded by people to enjoy more fun journey on their E-rides. If you are one of them, you can also make your scooter fast by following these easy steps.

1. Remove Speed Limitations

Removing speed limitations by removing the speed limiter is one of the easiest and top ways. You can perform this using your electric scooter display without getting your hands dirty. Also, you can do this manually using the tool. You can check out the above section in this regard!

2. Keep Your Battery Charged

If your electric scooter battery is not adequately charged, you will undoubtedly face lower top speed and poor acceleration. The lower the battery level, the lower the rate will be.

If you have an electric scooter, you will surely experience performance differences when the battery goes downwards. It has been observed that electric scooters will show poor acceleration when the battery is 35% to 40%. On the other hand, it’s hard to reach the maximum or top speed when your scooter’s battery ranges from 20% to 40%.

So, to enjoy the maximum speed of your electric scooter, you have to make sure the battery is adequately charged and the maintenance. Otherwise, your electric scooter will not go to full speed.

3. Prioritize the Use of Airless Tires

Airless tires are found to be stickier with the road and ensure less friction with the ground. So, when you have less friction produced, ultimately, you will enjoy higher speeds. Besides, it has been observed that these tires also promote autonomy, enabling more chances to ride more miles.

4. Sprockets Change or Renovation

Sprocket renovation depends upon the age of your vehicle; if it is new, definitely renovation is not a good option to adopt. To enhance the electric scooter speed, the sprockets should produce no friction. So, you are highly advised to spray some oil after intervals to reduce the friction.

By the time, sprockets wear and generate more friction, even with other components. That’s what highly impacts the scooter speeds. You can also change them with new ones; this will create a huge difference.

5. Parts or Accessories Maintenance

Maintenance of electric scooter accessories is a bit of essential advice to you, by following which you can ensure maximum speed of the scooter. Even if a single part is not working correctly, try to maintain or replace it. If you don’t do this, it’ll later impact other features too.

For example, shocks and bumps highly impact the other electric scooter parts during high-speed riding.

6. Use an App to Make Electric Scooter Faster

An electric scooter can be a great way to get around, but sometimes you need extra speed. There are things to make your electric scooter faster, but one of the easiest is downloading a particular app.

There are a few different apps available that can help you make your electric scooter faster. One of the most popular is the “Electric Scooter Speed Boost App” and it’s available for Android and iOS devices.

Once you download and install the app, you must open it up and follow the instructions. After you’ve installed the app, you’ll need to restart your electric scooter. Once it’s turned back on, you should notice it going faster than before.

These are the changes that you do not have to make in your routine. For example, the replacement of shocks and bumps, when they reach their durability or rewind of motor, etc. These are the things that can be included in uncommon changes.

It has been observed that uncommon changes highly boost the electric scooter speed. Here, the two significant distinctive changes to maximize the speed of an electric scooter have been described below.

1. Change Your Scooter Battery

Changing your electric scooter’s battery may be hard for you. We understand that it’s challenging to find a suitable battery that will fit in the tiny space, but doing this will highly maximize the scooter’s speed. When you change the battery, proper and higher voltages will transfer to all of the resting components that propel you to higher speeds.Keep this highly in your mind!

Before changing, or replacing your battery with a high voltage battery, make sure your scooter and its components are built for higher voltages or not. Because if you fit a powerful battery into the scooter, maybe it can damage the electrical components of the motor itself.

2. Rewind Your Scooter Motor

It’s a risky and complicated solution that should not be performed while you have a time warranty. Once your genuine contract has expired, you can implement this method. Rewinding an electric scooter motor will give you less torque and higher RPM, directly increasing the scooter speed.

Let’s analyze how we can remove speed limiters on different electric scooter models!

Well, when you wish to remove the segway speed limiter is easy. What you need to do is you have to download a mobile application and connect it to your electric segway Ninebot scooter via Bluetooth.

Here, Xiaomi Flasher is an application. Install this into your smartphone. Now, power on your scooter and connect to your vehicle. You will find different flash versions, download any of these, and it’ll start progressing.

Once it has been downloaded, turn off your scooter, and then on after a while. Now, go to the web and search for scooterhacking.org. When you reach that page, make settings according to you, and click on the download button.

Then go to ES downG, allow the app, and then connect to the scooter. That’s how you can maintain and increase your scooter speed.

In Razor electric scooters, you will find a bicycle controller on opening the base. In which a circuit with a bunch of wires of different colors is present. What you need to do is just cut out similar color wires and tape them.These tires are controlling the speeds of your electric scooter.

Razor Electric Scooter Speed Limiter Removal

Here’s how you can remove the speed limiter and increase the higher speeds!

• Open your razor scooter base with the help of a pincer, and then open up the casing
• After it, pull out the bunch of wires and find the WHITE colored ones
• These are connected to the circuit, and you have to cut them
• After cutting, tape them to avoid dust, and close the base

Follow these simple steps to remove the speed limiter on your electric scooter Xiaomi 1S:

• Install m365 DownG application from Google Play Store
• Then, download the Xiaomi m365 max speed firmware modified software
• Open the m365 DownG app, and then connect to your scooter
• Check version, open BIN, and tap on the flash
• Well done, you have removed the speed limiter, enjoy driving full speed

How to Remove Speed Limiter on Electric Scooter Xiaomi Pro 2?

To remove the speed limiter on the electric scooter Xiaomi Pro 2, you have to follow the same procedure in Xiaomi 1S. Just make an abrupt change. Try to search for custom firmware now because, on different models, you have to download modified versions.

Gotrax has come up with a speed limiter, and it can be removed easily. All you need to do is identify that particular wire and cut it down with a screwdriver. By doing this, you will unlock all the speed limitations on your Gotrax electric scooter.

The RED, WHITE, and BLACK wires are generally counted as speed sensing wires for your navigation.

Gotrax Gxl V2 Speed Limiter Removal Hack

Just make sure you have installed the current version of m365 and modified the software application of Gotrax Gxl V2. You have to do this using your smartphone. Then, open your m365 software, and connect it to your vehicle.

Just check out the version, empty the BIN, and tap on the flash. Enjoy the increased speed of your Gotrax electric scooter by the removal of the speed limiter.

You can unlock the maximum speed of your Joyor electric scooter by removing the speed limiter. Just follow these simple steps.

• Download m365 DownG application from Google Play Store
• Install Joyor scooter modified application in your smartphone
• Open the m365 DownG app, and then connect to your joy or scooter
• Check app version, open BIN, and tap on the flash button

When your application is connected to the scooter, you can increase speed, and that’s how your speed limiter will be removed.

How to remove speed limiter on Joyor X5S?

On my X5S, I discovered the correct blue cable. It appeared directly from the DC controller (the first, wrong one I cut came from a connector). Although the second one I left alone was about twice as thick as the one I cut, it was slightly wider than the motor controller cable. When there was no weight, the speedometer increased to 43 km/h.

How to Remove Speed Limiter on Electric Scooter Aovo Pro?

Open the base of Aovo Pro electric scooter by unlocking crosshead screws. Pull out the circuit where all the wires are connected. You will find a RED colored wire which sensors your speed. Cut this wire with the screwdriver and tape to avoid dust particles. That’s all you need to do!

How to Remove Speed Limiter on Bird Scooter?

Removing the speed limiter is easy on bird electric scooter, and you can do this using the display screen of your scooter. Just tap onto your display screen. Find out the speed options, and move P1 to P3. Click on the “S” button to make sure that your manual settings are saved or not.

Disabling the speed limiter on electric scooters depends upon the model of the scooter. In the case of some scooters, you have to open the base, find wires, and then cut them out to make sure that you have removed the speed limiter.

On the other hand, some scooters speed limiters can be removed by just using the display screens. Lastly, some are required to be hacked using applications, etc.

How do You Take the Speed Limiter off a Scooter?

It can be taken off in different ways, and these may be:

• Manually, using tools like pincer and screwdriver
• Using display screen of the scooter
• Hacking the scooter using various applications